Single channel 31 band graphic equalizer

Quantity can be changed within the cart

The single channel 31 band EQ from Applied Research Technology features a 1/3 octave graphic equalizer constant Q circuitry with a 3% center frequency accuracy, 20mm center detent sliders, selectable boost/cut range of 6dB or 12dB, active balanced and unbalanced input and output connections, adjustable high pass filter, adjustable low pass filter, variable input level control, clip level indicators, ground lift switch, internal power supply and selectable line voltage switch.

A range control switch is provided which allows you to set the maximum boost or cut for each band of equalization to either 6dB or 12dB. The high pass filter rolls off lower frequencies which is useful for decreasing rumble or low frequency hum from a signal . Its range is adjustable from 10Hz to 250Hz. Frequencies below this setting are rolled off, while frequencies above are unaffected. The low pass filter rolls off higher frequencies which is useful for reducing hiss or sibilance from a signal. Its range is adjustable from 3kHz to 40kHz. The rugged, all-steel constructed chassis occupies 1U rack space and is intended for installation in standard 19" equipment racks.

The 351 Single Channel 31 Band Eq has the features and performance you need for any of your audio applications requiring equalization.
• Single Channel 31-Band Graphic Equalizer• Constant-Q Filtering
• Balanced XLR, Active Balanced 1/4", and Unbalanced RCA Input and Output Connectors• +/- 6dB or +/-12dB Level Adjustments
• 20mm Center Detented Frequency Band Sliders• Independent Level and Bypass Controls Per Channel
• Designed for Years of continuous, reliable performance• Rugged All Steel Construction
Channel Separation> 50dB
ControlsPower On/Off Switch; Filter Range Switch; Bypass Switch; Level Control; AC Voltage Selector; Ground Lift Switch
Filter TypeConstant Q - 3% center accuracy
Frequency Bands31, 1/3 octave, ISO spacing
Frequency Response20Hz to 20kHz, +0.5dB
Indicators6dB/12dB Range LEDs; Bypass and Clip LEDs
Input Impedance20k Ω (bal), 15k Ω (unbal)
Input/Output ConnectionsActive balanced XLR and 1/4" TRS {XLR pin 2/ 1/4" tip = Hot (+)} Unbalanced RCA
Maximum Input Level+22dBm
Maximum Output Level+18dBm (bal), +22dBm (unbal)
Power(Switchable) 95-130VAC, 50/60Hz
Power Consumption12 W
Range+/-6dB or +/-12dB selectable
Signal to Noise Ratio-94dB
Slider Travel20mm w/ positive center detent
Total Harmonic Distortion0.0001
Dimensions1.75"H x 19"W x 8.5"D
Weight4.5lbs (2.5kg)
Coming Soon
There are no questions regarding this product. Contact us to ask a question
Coming Soon

Shipping: Actual shipping charges are calculated after order is received but before you are charged. Please see our shipping page for more details